Halda M12 Meter and Printer

About the Halda M12 Taximeter

• Now available in 5 different backlight colours Red, Green, Blue, Cyan or Amber
• Versatile programming options, Manual control, Calendar Locked, Dual Calendar or Combinations of both to a maximum of 150 fully independent tariffs.
• A four mode display dimmer function allows the illumination of the screen to be manually adjusted to give maximum visibility, so the fare can be clearly seen even if the meter is in direct sunlight.
• It can keep track of both daily and accumulated totals and even give a detailed printout of the last 250 jobs.
• A pending tariff change can be pre-loaded into the M12 and a date set for the tariff to come into force automatically, saving you valuable time and money.
• Supply Voltage: +6.0v - +18.0v
• Current Consumption: 0.3amps active (Excluding For Hire Lamps) 00.5amps Idle
• Relay Outputs: 4 x Fully Progammble MOSFET Relays
• (Total Max Current 2amps)
• 1 x For Hire Relay (Max Current 7.5amps)
• Inputs: 4 x Fully Programmable Inputs for connecting Mobile phones or Pressure Mats Etc.
• Pulse Inputs: 3 User Selectable Pulse Input Modes
• 1 x Open Collector input
• 1 x Sinus Input (ABS type sensor)
• 1 x Active Input
• Protection: Reverse Polarity, Overcurrent & Overvoltage Protected
• Communications: RS485 for Printer,Cardswipe & Data Transfer
• Sealing & Approvals: The M12 Taximeter can be sealed in compliance to B.S.I/P.C.O & International Standards using either the plastic push-in or lead type seals
• Operating Temperature: -25c to +55c
• Storage Temperature: -40c to +85c
• Dimensions: 1Din Size Mounting 280 x 51 x 16mm

About the Halda Thermal Printer

• Easily create your own logo on the printed receipts.
• Thermal printer which prints full graphics and which can work with Windows drivers.
• Dimensions (w x l x h): 122 x 55 x 112 mm
• Printing technology: Thermal printer for 58 mm thermal paper, with fixed print head.
• Printing speed: Eight lines per second at 24 characters per line.
• Resolution: 384 dots per line
• Fonts: 16, 24, 54 characters per line. Normal, Bold, Italic. ASCII including European characters, Greek, Latvian.
• Graphics: Yes, with special driver (bitmap graphics).
• Paper loading: Automatic, and with manual feed button.
• Environmental requirements: According to the regulations of the Swedish National Road Administration (Vägverket), VVFS 1999:177, and Cenelec EN 50148:1995.
• Temperature range: –25 °C to +55 °C degrees in operation –40 °C to +70 °C at standby.
• Magnetic card reader: Input for magnetic card reader for track 2
• Operating Voltage: +12v / +24v D.C